Contract Production Case Studies

Production techniques employed here at Fibre Composites enable our staff to manufacture a wide and varied range of components for a number of clients whose products cover an immense variety of industries. Anywhere from mining, electrical, transportation, aqua culture or consumer goods the list of goods that contain something produced here at Fibre Composites continues to grow with many satisfied customers both here in Australia and overseas.

This page shows just some of the products that we produce that are used by industry to complete their products. 

Portable ensuite fills the need for temporary bathroom alternatives in the building renovation and social functions market.

This portable ensuite is completely constructed here at Fibre Composites. From the initial mouldings of the inner and outer shells right through to the plumbing and electrical work, the complete unit is delivered to the client ready to use. These units are widely available throughout Australia for hire, filling the need for temporary bathroom alternatives in the building renovation and social functions market.

Fully moulded fibre glass horse float roofs.

Our client builds horse floats for distribution around Australia. At Fibre Composites we produce several different size fully moulded fibre glass roofs to suit our client's model range.

The series of photos above show a completed fully moulded fibre glass roof at our facility, the roof being fitted to a horse float in our client's factory and finally the completed float, assembled and ready for delivery. 

Fitness Equipment

Our client manufactures and supplies products for the fitness market.  In this case we produce among other products a fully moulded fibre glass instrument panel for one of his machines.

Our pictures show the completed instrument panel and the panel mounted to the machine with the instruments fitted. 

Floats for a sewerage treatment works 

These large floats were produced to support the aeration equipment for a sewerage treatment works in Australia . The structures support the large electric motor, impellor and walkway sections. Each unit is filled with expanded foam which is fully encapsulated by the external laminate.

Through the centre of each unit there is a funnel section which houses the large impellor that creates the aeration action.

Industrial Fans

Our client manufacturers large industrial fans for industry. At Fibre Composites we produce the fan mount for these fans.  The fan mount is approx 1.8 metres in diameter. Our pictures shows the finished mount [left] and our client's fan with the surrounding shroud. 

Pump Stands

Our client distributes pumps for various applications. In need of a lightweight yet strong base that was impervious to rust and chemicals he asked Fibre Composites to provide a solution. We now produce a range of fully moulded fibre glass bases and stands for our client's products.

Pit Box for underground cables.

Our client lays underground cables and required a solution that enabled the cables to be accessed for inspection or repair. The solution needed to be strong, made from material that would not degrade and light enough for our client's technicians to install on site.

Fibre Composites provided a solution produced from Fibre Glass that is designed to be much stronger than the plastic alternative and much lighter to handle than concrete boxes but still give the strength required.

Pictured below is a pit box being installed on site ready for the cable layers.

Battery Carrier 

An automotive battery manufacturer needed a solution to stack batteries on pallets for storage and ready for movement by fork lift around their warehouse. 

The batteries contained acid, a corrosive substance and were stored in a fully charged state. The solution also needed to be strong yet light enough to place in position by one person.

Fibre Composites provided a solution produced from fibre glass which is not affected by the acid does not conduct electricity and is strong yet lightweight compared to steel or timber. 

Secondary fit-out services 

Fibre Composites are able to not only produce solutions for their clients but are able to provide secondary fit-out services for those solutions. When several sections of a product need to be fibre glassed together, have holes drilled, need plumbing or have fittings supplied and installed Fibre Composites can provide the solution.

One call to our team will get your project off to a great start - our contact details are 

Fibre Composites
	Address	34 Gum Avenue, Dry Creek, South Australia, 5094
	Phone:	+61 08 8260 7729
	Fax:	+61 08 8260 2699
	E-Mail:	fibrecomposites@optusnet.com.au
Request further information about our Company and our products.   Click here to request information.