Fully Moulded Modular Shower Cubicles

All Fibre Composite fully moulded shower cubicles are made from sanitary grade materials and come complete with floor waste hole and shower curtain rail. Although not supplied by Fibre Composites, all units are suitable to fit a pivot or sliding shower screen. Most areas have shower screen manufactures that can supply and fit screens if you require one.

To increase under floor stiffness they are fitted with a solid 6mm cement fibre sheet under the floor which enables the unit to be fitted without the need for a mortar base.

An anti slip base is moulded into each cubicle to enhance the safety of the user.

Most cubicles have an integrated soap dish and the 1200LS also has integrated foot rests.

It is important to measure the access ways into the bathroom, as some of the larger cubicles won't fit through standard single doorways. There are three models in the range that are available as a split unit, this enables them to be carried through smaller doorways than they would otherwise fit through, giving you the option of choosing a larger cubicle.

Cleaning of the surface finish is easy with most proprietary brand shower cleaners.

If you're requirements are for larger quantities, here at Fibre Composites we have the capacity to produce large volumes quickly to enable your project to proceed without delay. We have a number of commercial clients using hundreds of our cubicles per annum. As you can see from our wide range of sizes we cater for a variety of applications.

If you're sick of trying to clean in tight corners or have had enough of trying to fix leaky showers then our cubicles can solve your problems in one go.

Click here to view or download printable PDF specification sheet for all of our modular showers.

You'll need Adobe Acrobat reader to read a PDF specs sheet.  If you don't have Acrobat installed on your computer you can download it by clicking the Adobe logo below.

One call to our team will get your project off to a great start - our contact details are 

Fibre Composites
	Address	34 Gum Avenue, Dry Creek, South Australia, 5094
	Phone:	+61 08 8260 7729
	Fax:	+61 08 8260 2699
	Mobile:	0429 811 397
	E-Mail:	fibrecomposites@optusnet.com.au
Request further information about our Company and our products.   Click here to request information.